Custom CNC Cut Letter Sign
FLAT_METAL_CUT_SIGN_SEATTLEPH.png
FLAT CUT METAL LETTERS

PRECISION-CUT WITH HIGH-PRESSURE WATER JET CNC AND LASER.

Stylish enough for the boardroom yet tough enough for the great outdoors, our Flat Cut Metal Letters and Logos are made true, from high-grade plate metal.

From prime Aluminum, to Stainless Steel, to Bronze, to Brass, Copper, and Core-Ten® steel, we offer the widest range of metal alloys, finishes, and gauges. More choices - more options for you.

Custom logo/letter cut signage manufactured and installed for NEXUS in Tukwila, WA

We used 6MM brushed silver aluminum composite panel for the non-illuminated interior signage.

IMG_1679.JPG
CUSTOM SIGN LETTERS
 
 
FABRICATED METAL LETTERS
FABRICATED_LETTER.png
gemini_authorizedreseller_3stacked.jpg

WE CRAFT OUR OWN FABRICATED METAL PRODUCTS, SO WE KNOW THEY'RE ALWAYS MADE TRUE.

Selected by industry giants such as Exxon, J.P. Morgan Chase, IBM and Caterpillar, our fabricated metal letters project strength and stability.

Choose from a wide variety of finish options in stainless steel - brushed, polished, titanium coated, or painted.  Fabricated aluminum painted, brushed or anodized. 

We’ve expanded our metal fabrication capabilities to include structurally robust gauges of aluminum.  In fact, our new line of aluminum fabricated letters presents a solution for larger letter applications where our fabricated stainless steel letter line leaves off, extending custom letter height possibilities from 16” up to an impressive scale of 120” high.

Full Storefront

Fully customized storefront manufactured and installed for FACE X in Bellevue, WA

We used 3MM gloss black aluminum composite panels for the wall covering and fabricated illuminated metal signage.

LASER_CUT.png

SIZE & THICKNESS

 

1/8" thick, sizes from 1" - 24" 
3/16" thick, sizes 1" - 30"
1/4" thick, 1" - 48"
3/8" thick, 1" - 72"
1/2" thick, 2" - 72"
3/4" thick, 2" - 72" 
1" thick, 2" - 72"

LASER CUT ACRYLIC SIGN LETTERS

We cut Acrylic sign letters out from a flat solid sheet by a laser and are available in different thicknesses up to 1 inch and many colors. The laser cut out letters have a smooth polished edge. Each individually cut out acrylic sign letter comes complete with mounting hardware and is easy to installs in minutes. The acrylic lettering can be laminated with a metal veneer, plastic veneer or custom printed vinyl to offer a rich look.

fullsizeoutput_55b6.jpeg

Custom logo/letter cut signage manufactured and installed for Sports Zone in Eugene, OR

We used 1/2" high gloss acrylic letters on a custom printed background. 

MOUNTING OPTIONS

  • PLAIN MOUNT

     

    Letters with no mounting hardware, Display Letters can be attached to mounting surface with a combination of adhesive or double-faced tape – applied by installer – based on surface and letter weight.

     

  • STUD MOUNT

     

    Stud blocks are solvent bonded to letter backs to receive a 10-24 stud.  These blocks will require the letters to stand-off the mounting surface approximately 3/8" - 1/2".  Drilling patterns are required for this installation. (view drawing)

     

  • FLUSH STUD

     

    Thicker letters (min. 3/8" th) can be drilled and tapped for stud installation.  Specify if studs need to be in line for brick / block mortar joints or rails. 

     

  • FCA-STUD FOR BRICK/BLOCK

     

    Stud blocks are solvent bonded to letter backs to receive a 10-24 stud or on 3/8" or thicker material, drilled and tapped.  These blocks will require the letters to stand-off the mounting surface approximately 3/8" - 1/2".  Studs are in line for mortar joints of brick or block.  Drilling patterns are required for this installation.

     

  • FCA-STUD FOR RAIL

     

    Stud blocks are solvent bonded to letter backs to receive a 10-24 stud or on 3/8" or thicker material, drilled and tapped.  These blocks will require the letters to stand-off the mounting surface approximately 3/8" - 1/2".  Studs are in line for rails at the distance you specify.  Drilling patterns are required for this installation.

     

  • PAD MOUNT

     

    Pads are plastic disks on the rear of the letters.  Secure the letters to the wall using a split stencil pattern or spacing tape guide and silicone adhesive.  Adjustable or flush pads available upon request.

     

  • COMBINATION MOUNT

     

    Combination of studs and pads. Stud through a pad on the top portion of each letter, pads only on the bottom portion of each letter. Mounting procedure is the same as a Stud Mount with the addition of securing pads to the mounting surface with adhesive. Studs can be aligned in-line for brick or block mortar upon request.  Laser cut letters (min. 3/8" th) can be drilled and tapped to receive studs to allow for a flush mounting.  Drilling patterns are required for this installation.

     

  • COMBINATION ALL

     

    Combination all mounts have stud through a pad on the top and bottom portion of each letter. Mounting procedure is the same as a Stud Mount. Studs can be aligned in-line for brick or block mortar upon request.  Laser cut letters (min. 3/8" th) can be drilled and tapped to receive studs to allow for a flush mounting.  Drilling patterns are required for this installation.

     

  • DOUBLE FACED TAPE MOUNT

     

    Double face tape mount comes with either partial or fully covered backs with a VHB, double faced tape. Volume of tape is based on letter size and gauge. Heavier letters may require tape and adhesive (such as epoxy on acrylic) to properly secure letters. VHB tape is designed for interior, flat, dry wall installations. 

 
 
FORMED PLASTIC SIGN LETTERS
FORMED_PLASTIC.png
gemini_authorizedreseller_3stacked.jpg

MADE FROM EARTH-FRIENDLY DURABLE PLASTIC, PRODUCED FROM START TO FINISH BY GEMINI.

Our Cellulose Acetate Butyrate (CAB) formed plastic letters and logos are tough, weather-resistant, earth-friendly, and the first dimensional letters we manufactured 50 years ago.  If you see a formed letter in your neighborhood, more than likely it's ours.  The original.

Choose from 128 standard styles or we can dimensionally replicate your custom letter or logo art design. 29 standard pigmented plastic colors, or painted to match your custom color. Deep dimension at a relatively affordable price. 

 

Formed plastic GemLite Letters & Logos can be your low-profile, edge-lit alternative to traditional aluminum fabricated channel letters. Available facelit or backlit with LEDs -- all UL certified, ready to go. 

 

Visit our showroom to choose your letters today!